B&R 5AP1120.0573-000 User Manual Download Page 197

Page: 197 / 204

Appendix A

Automation Panel 1000 user's manual V2.00

197

A.5.2.3 10.4" devices

The cutout tolerance for the PP100/200, PP300/400, PP500, AP900, PPC700 and PPC800 is ±0.5 mm.

The cutout tolerance for the AP1000 is +0 mm / -0.5 mm.

323 x 260

8.5

Outer contour of device
Cutout for device

303 x 243

PP100/200/300/400

AP900/PPC700

PP100/200/300/400

AP1000

PP500

AP1000

AP900

Figure 106: Installation compatibility - 10.4" devices - Landscape1

10.4" Automation Panel 1000, Automation Panel 900, Panel PC 700, Power Panel 500, Power Panel 300/400 and

Power Panel 100/200 devices in Landscape1 format are 100% compatible.

Outer contour of device
Cutout for PP100/200/300/400 device

PP100/200/300/400

AP900/PPC700

Cutout for AP900/PPC700 device

423 x 288

8.5

402 x 271

402 x 266.5

403 x 271

PP500

Cutout for PP500/AP1000 device

AP1000

0.5

13 PP100/200/300/400

8.5 AP900, PPC700

8.5 PP500, AP1000

Figure 107: Installation compatibility - 10.4" devices - Landscape2

10.4" Automation Panel 1000, Automation Panel 900, Panel PC 700 and Power Panel 500 devices are not 100%

compatible with Power Panel 300/400 or Power Panel 100/200 devices in Landscape2 format. Automation Panel

1000, Automation Panel 900, Panel PC 700 and Power Panel 500 devices need a cutout that is 4.5 mm larger

(bottom edge) and 0.5 mm wider (left and right).

The larger cutout can be used conditionally for all devices:

•

During installation, it is important to ensure that the PP100/200 and PP300/400 devices are positioned and

installed as centrally as possible in the cutout. If this is not the case, the retaining clips can no longer grip

and impermeability is no longer ensured by the circumferential cord gasket (IP65).

Summary of Contents for 5AP1120.0573-000













































































































































































































Search results

Summary of Contents for 5AP1120.0573-000

Reviews:

Brands by name

Popular brands

B&R 5AP1120.0573-000, User Manual

Search results

Summary of Contents for 5AP1120.0573-000

Reviews:

Brands by name

Popular brands