Software
260
Panel PC 2200 built-in devices User's manual V 1.05 Translation of the original documentation
4.4.6 Drivers
The operating system contains all drivers required for operation. If an older driver version is installed, the latest
version can be downloaded and installed from the B&R website (
). It is important to ensure
that "Unified Write Filter (UWF)" is disabled.
Information:
Necessary drivers must be downloaded from the B&R website, not from manufacturer websites.
4.4.7 Activation
Windows 10 IoT Enterprise 2016 LTSB must be activated like its predecessor Windows 10 IoT Enterprise 2015
LTSB. This takes place at B&R.
The activation status can be checked in the Control Panel:
Figure 144: System properties
Activation carried out by B&R is supported by special B&R extensions in the operating system and theoretically not
lost when the hardware is changed (e.g. replacement of components in the event of repair) or when the system is
reinstalled, unlike Windows 10 IoT Enterprise 2015 LTSB (Microsoft reserves the right to make technical changes
without notice).
Information:
It is not required to enter a product key for activation.
4.4.8 Characteristics, limitations
•
Unlike a standard Windows 10 Enterprise version, Windows 10 IoT Enterprise 2016 LTSB does not contain
Cortana, Microsoft Edge Browser or Microsoft Store, for example.
•
The LTSB version is based on build 14393 of Windows 10 and does not receive any feature updates.
The version installed by B&R contains optimized settings for operation in an industrial environment. These are
described in detail in a manual for Windows 10 IoT Enterprise 2016 LTSB. This can be downloaded at no cost from
the Downloads section of the B&R website (
