Commissioning
Panel PC 2200 built-in devices User's manual V 1.05 Translation of the original documentation
211
3. Install the retaining clips on the device. To do this, insert all retaining clips into the recesses (marked with
orange circles) on the device. The number of retaining clips may vary depending on the panel. For the exact
Fig. 4 "Panel PC 2200 with AP9x3 panels - Installation diagram" on page 21
.
Figure 113: Inserting the retaining clips
4. Secure the retaining clips to the wall or control cabinet plate by alternately tightening the mounting screws
with a 2.5 mm hex screwdriver. The tightening torque for optimal sealing should be max. 1 Nm.
1 - 6 mm
Wall or
control cabinet plate
Figure 114: Tightening the retaining clips
