Technical data
Panel PC 2200 built-in devices User's manual V 1.05 Translation of the original documentation
21
2.2.1.2 Installation diagrams
Information:
When installing the Panel PC 2200, spacing for air circulation and additional free space for operating
and servicing the device must be taken into account.
AP9x3 panels - Installation diagrams
Y
X
Z
Figure 4: Panel PC 2200 with AP9x3 panels - Installation diagram
All dimensions in mm.
The cutout tolerances are +0 mm / -0.5 mm.
Display type
Model number
X
Y
Z min.
Z max.
Number of retaining clips
12.1" single-touch
5AP923.1215-00
304
228
1
6
10 pcs.
15.0" single-touch
5AP923.1505-00
359
277
1
6
10 pcs.
19.0" single-touch
5AP923.1906-00
429
347
1
6
12 pcs.
15.6" multi-touch
5AP933.156B-00
403
247.5
1
6
10 pcs.
18.5" multi-touch
5AP933.185B-00
464
284
1
6
10 pcs.
21.5" multi-touch
5AP933.215C-00
530.5
322
1
6
14 pcs.
24.0" multi-touch
5AP933.240C-00
587.5
353
1
6
14 pcs.
Table 13: AP9x3 panels - Installation diagrams
Dimension "Z" describes the thickness of the wall or control cabinet plate.
A hex screwdriver is needed to tighten and remove the screw on the retaining clips. The maximum tightening torque
of the retaining clips is 1 Nm.
