- 7 -
Wireless charging system 210W specification
System configuration and product configuration
2.Feature
● Signal transmission system and non-contact power transmission
The signal transmission and power transmission, because the electromagnetic coupling method, is car-
ried out in a non-contact, no problem glass-plastic even in the presence of the transmission space.
● Oscillation power control function
If you have a transmission area within the specified range within the active head / passive head, active
head will make the oscillation behavior by controlling so that the internal voltage is constant value.If not
in the transmission area is passive head, and it is the specifications that make the intermittent oscilla-
tion. In the case in the transmission area is passive head, in zone LED on the power supply unit is lit, in
zone signal is output to the outside.
● Active head overtemperature protection
If the piece of metal was present in the transmission space oscillation operation of the active head,
internal heating of the active head exceeds a certain temperature due to its effect, it shifts to the inter-
mittent oscillation protection function is activated.
● Battery voltage monitor function
If you have the inzone passive head, [voltage monitor signal H, M, L] is output to the outside from the
charging unit and power supply unit according to the battery voltage.
If there is no inzone passive head, when you connect the power of the default from external control de-
vices that are connected to the charging unit to [voltage monitor request], [voltage monitor signal H, M, L]
is to the outside from the charging unit is output.
● Charging function
Charging of the battery, held at the CC / CV charging, full charge is virtually possible. It is determined
that the full charge charging voltage reaches a certain level or higher, and then start the float charging.
● Charging voltage error detection function
If you turn on the power to connect the battery of an adaptive voltage other than by mistake, it does not
start charging.
● Battery reverse connection or non-connection (disconnection) detection function
If you connect to reverse the battery terminal by mistake, it does not start charging.In addition, if the ca-
ble leading to the battery for some reason is broken, I will cut off the charge.
● Overcurrent protection
If the charging current flows at least a certain charging, after continued for 1 minute wait state, and
then shut off the charge.
● Overvoltage protection
If the charging voltage is constant over during charging, after continued for 1 minute wait state, and
then shut off the charge.
● Battery overheating protection
Battery is more constant temperature, when it comes to constant temperature or below, after continued
for 1 minute wait state, and then shut off the charge.
