BANDIT CONTROLS - CE
3/19
72
4
245840062970 8Oct2018
Mode Page
2. Press the FS On (Fuel Saver On) button to turn on Fuel Saver Mode.
4. Press the “Bypass” button to manually run Feed Fwd at low Eng RPM and bypass the AutoFeed control. This
will allow auxiliary functions to be operated. To turn AutoFeed back on, press the same “Bypass” button
again. At startup, the machine always defaults to AutoFeed ON when the key is first turned on.
(A popup alert indicating the controls are in Bypass will blink on every screen because certain control features
are disabled while in Bypass).
(While feeding fwd with AutoFeed ON, when you throttle down Feed Fwd will drop out and AutoRev will fire
one time. This is to give the operator a chance to observe the AutoRev settings).
5. Go back.
1
2
3
4
5