B&G Vulcan Series, Operator'S Manual, Page: 75 / 198

Race timer controls
You can access Race timer controls from the Race panel menu. You
can also access them at the bottom of the Race timer panel
displayed from the Home page and the Race timer panel displayed
from the Trip Calculator (Tool panel). Different controls are enabled
depending on if the timer is started or stopped.
Set start value
Set a time value which the timer shall use to count down to the
start time of the race. The timer starts counting down when you
select
Start
.
Start/Stop timer
The timer can be started at any time by selecting
Start
. If a time
value is preset, the timer counts down. If the start value is set to zero
(00:00) when the timer is started, the timer begins counting up,
recording the elapsed time.
To stop the timer from counting select
Stop
.
Reset
Resets the timer to the start value. If the timer is running when
Reset
is selected, it continues to run from the start value.
Race panel | Vulcan Series Operator Manual
75