B&G Vulcan Series, Operator'S Manual

Page: 110 / 198

A recorded radar file can be used for documenting an event or an
operational error. A logged radar file can also be used by the
simulator.
If more than one radar is available, you can select which source you
want to record.
Radar settings
Radar symbology
You can select which optional radar items that should be turned
on/off collectively from the menu. Refer to the Radar panel
illustration.
Bearings
Used for selecting whether the radar bearing should be measured
in relation to True/Magnetic North (°T/°M) or to your relative
heading (°R).
Data bar
Turns on/off the radar data bar. Refer to the radar panel illustration.
The data bar can show up to 3 targets, arranged with the most
dangerous targets on top. You can select to show MARPA targets
on top and before any AIS targets, even if the AIS targets are closer
to your vessel.
110
Radar | Vulcan Series Operator Manual