manualshive.com logo in svg

B&G Vulcan Series, Operator'S Manual, Page: 144 / 198

Share
Download
B&G Vulcan Series Operator'S Manual Download Page 144

the unit does not appear, follow the on screen instructions to
manually find the device.

The MFD's display is shown on the smartphone. To change the
MFD's display on the smartphone, use the MFD to change the
display on the MFD. The display change on the MFD is reflected on
the smartphone.

Uploading log files to Insight Genesis

To upload a recorded Echosounder log file to Insight Genesis, select
the file you want to upload from the Files panel and select the
upload to Insight Genesis option.

Ú

Note: 

You must be connected to a wireless hotspot to upload

recorded log files to Insight Genesis.

Ú

Note: 

Recorded log files can also be uploaded to Insight

Genesis if you have specified 

Upload to Insight Genesis

 in

the Record Echo dialog. For more information, refer to 

"Start

Recording log data"

 on page 117.

Wireless settings

Provides configuration and setup options for the wireless
functionality.
For more information, refer to the Vulcan Installation Manual.

144

Wireless connection

| Vulcan Series Operator Manual

Summary of Contents for Vulcan Series







































































































































































































Reviews:

No comments