B&G LCD Plotter
Part 2 - Operating Information
HB-0847-02
2-9
but not connected to the GPS, the first cartographic image will be a large
panorama centred on Africa, independent of the cartridge inserted. A small
square indicates the limits of the cartridge currently inserted. Press the
CURSOR key to move the cursor within the square and successively zoom
as desired.
If the LCD Plotter is connected to a GPS, the image automatically centres
on the boat position in the 4 NM scale. If a route is already shown on the
display, the autozoom function is automatically selected.
The maximum level of detail corresponds to that of a port plan and is
approximately equivalent to one metre per pixel or 1/8 NM.
Always verify that the rubber cap is completely sealed, especially if the LCD
Plotter is installed outside, as water may damage the memory card. Only
remove the rubber cap when the instrument is dry.
2.6
Chart Information
Navionics charts contain the following types of symbols:
100
2.7
Using the Zoom Key
To increase or decrease the coverage shown on the LCD Plotter screen,
press and hold the ZOOM +/- key and release at the desired setting.
Spot Depth
Shipwreck
Navigational Aid: Lights
Depth Contour
Port Services
www.bandgservice.co.uk
+44 (0)1590 689699
