background image

51336-005 en/2022-03

7 / 25

1

 electronic GmbH & Co. KG  •  Heinrichstraße 3-4  •  12207 Berlin  •  Deutschland  •  [email protected]

1.2  

 Purpose  

The  shaking device SA 1028 can be used in the scope of  sample preparations, e.g., 
in laboratories and in industrial and academic research, to equip SONOREX DIGITEC 
DT 1028 F 

fl

 at ultrasound devices with a shaking function (“SONOSHAKE”). 

This allows the simultaneous sonication and shaking of 

fl

 asks of di

 erent shapes and 

sizes. This may have a catalytic e

 ect during sonochemical processes, e.g., in the 

production of stable emulsions or the rapid degasi

fi

 cation of 

fl

 uids with a high gas 

content. 

For the intended use, the samples must be placed in suitable vessels (e.g., laboratory 

fl

 asks) and secured in the  roller carriage ("indirect operation").

Existing SONOREX DIGITEC DT 1028 F ultrasonic baths can be equipped with the 
 shaking device without any need for modi

fi

 cations. The  shaking device must not 

be operated without a SONOREX DIGITEC DT 1028 F  ultrasonic bath. The unit is 
intended for table-top operation. 

1.3  

CE conformity  

The  shaking device SA 1028 is with the CE marking criteria of the European Directives: 

- " 

Low-voltage directive" 

- " 

Electromagnetic compatibility" directive 

- " 

Machinery directive"

-  RoHS – directive

in their currently valid versions.

The  declaration of conformity can be requested from the  manufacturer by providing the 
serial number.

Summary of Contents for SONOSHAKE


























Reviews: