![background image](http://html1.mh-extra.com/html/bandelin/sonoshake/sonoshake_user-instructions_3718197013.webp)
1 ... 4 mm distance
Washers
and screws
Terminal strip
Right handle
(DT 1028 F)
Mount
Tubes
51336-005 en/2022-03
13 / 25
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
2.2.2
Installing the mount
Position the mount in the centre below the right handle of the ultrasonic bath.
Place the terminal strip on the handle.
Secure the mount and the terminal strip on the handle with
the washers and screws.
Important
The mount must be secured centrally on the handle,
so that the sliding rod does not grind.
Refer to the image in
Section 2.2.5 “Checks”.
2.2.3
Secure/fasten device
Push the drive unit onto the threaded bars – through the tubes – as far as it will go.
The screw the star knobs onto the threaded bars and tighten.