background image

EK 10

EK 100

51336-005 en/2022-03

23 / 25

1

 electronic GmbH & Co. KG  •  Heinrichstraße 3-4  •  12207 Berlin  •  Deutschland  •  [email protected]

7  

 Accessories  

The proper  accessories facilitate use of the ultrasound and also protect the oscillating 
tank and objects to be treated. 

BANDELIN o

 ers a broad range of accessories.

Additional information may be obtained from our supplier, our sales representatives or 
from our website. 

No-obligation telephone consultation:   Internet:
 

+49-(0)-30 – 768 80 – 0 

 

 

www.bandelin.com

7.1  

Required  accessories  

EK  holding clamps are required for securing the laboratory 

fl

 asks.

They prevent the 

fl

 asks from moving around or toppling over and can be secured in the 

 roller carriage quickly and without any problems.
 Holding clamps are not included in the  scope of delivery.

type

Order No.

For 

fl

 ask 

size

Quantity

fi

 tting in 

 roller carriage

EK 10

7521

10 ml

35

EK 25

7519

25 ml

35

EK 50

7518

50 ml

18

EK 100

7516

100 ml

12

EK 250

3259

250 ml

10

7.2 Preparations 

 

- not applicable -  

Summary of Contents for SONOSHAKE


























Reviews: