![background image](http://html1.mh-extra.com/html/bandelin/sonoshake/sonoshake_user-instructions_3718197021.webp)
Friction clamp
(Order no.: MP-8138)
Loosen screw
51336-005 en/2022-03
21 / 25
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
5
Cleaning/ disinfection and care of the device
• Always unplug the mains plug before cleaning the device!
• Do not rinse o
ff
the device or immerse it in water: simply wipe the exterior with a
damp cloth.
• Do not use any steel wool, scratchers or scrapers.
• Rust particles from the water pipe system can penetrate the passive protective layer
of the stainless steel, "activating" the stainless steel and making it begin to rust. The
extraneous rust produces localised corrosion of the roller carriage. For this reason,
remove rust stains immediately using a soft cloth and a commercial stainless steel
cleaning product without abrasive additives.
• If scum/residues remain in the roller carriage after extended periods of use, they
should be removed using a commercial stainless steel cleaning product without
abrasive additives.
• If sounds (slight squeaking) are heard after extended periods of use as a result of
wear debris on the friction clamp, these can recti
fi
ed by cleaning (blow debris away),
see adjacent image.
Remove the friction clamp if necessary.
5.1
Warehousing / storing
During extended periods without use, the shaking device should be stored in a cool, dry
place. The roller carriage should be taken o
ff
the drive unit.