51816-001 en/2022-12
19 / 20
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
5.2
Repair
Repair work may only be carried out by authorised, quali
fi
ed personnel or by
the manufacturer. The manufacturer assumes no liability for any unauthorised work.
5.3
Service
If the function test identi
fi
es any errors or defects that cannot be remedied, the laboratory
cooler may no longer be used. In this case, the manufacturer must be contacted.
BANDELIN electronic GmbH & Co. KG
Heinrichstrasse
3-4
12207
Berlin
Germany
Repair
service: E-mail:
Tel.: +49-(0)-30 – 768 80 – 13
Fax: +49-(0)-30 – 76 88 02 00 13
Returns are subject to the General Conditions of Delivery and Payment of
BANDELIN electronic GmbH & Co. KG.
The laboratory cooler also needs to be cleaned and, if necessary, decontaminated before
being sent back. After that,
fi
ll out the “Certi
fi
cate of Decontamination” properly and attach
it visibly to the outside of the package. If this form has not been
fi
lled out, we reserve
the right to refuse receipt of the package in order to protect our employees. The “Certi
fi
cate
of Decontamination” can be downloaded from our website as a PDF
fi
le:
https://bandelin.com/fragebogen/Dekontamination_DE_BANDELIN.pdf
Returns should always be sent in an upright position so that the laboratory cooler does not
leak during transport.
To do so, we recommend returning the laboratory cooler on a pallet.
Please report any malfunctions to us in writing.
5.4
Emptying the system
If the laboratory cooler needs to be sent to the manufacturer for repair, or stored unused
for a longer period of time, the system must be emptied.
Disconnect the hoses and transfer the liquid from the laboratory cooler to an outlet
or bucket.
The laboratory cooler can be tilted a maximum of 90° for emptying in order to also
remove the liquid from the cooling coils.
Important
The laboratory cooler may not be switched on during this process as this will destroy
the pump.
