![background image](http://html1.mh-extra.com/html/bandelin/labocool-lc-400/labocool-lc-400_operating-instructions-manual_3666726008.webp)
8 / 20
51816-001 en/2022-12
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
1.1
Intended use
The LABOCOOL laboratory cooler is used to cool aqueous liquids in ultrasonic baths and
other open sonication vessels.
The LABOCOOL laboratory cooler is only suitable for ultrasonic baths or other vessels
with a
fl
oor drain.
The device is intended for commercial use and is designed for unobserved continuous
operation.
The target group for its use is trained specialists in laboratories or research facilities.
1.2
Mode of operation
With the integrated centrifugal pump, the bath liquid that is heated by the ultrasonic bath is
conveyed into a circuit through the LABOCOOL laboratory cooler and cooled to the desired
temperature. The integrated temperature controller enables the target temperature to be
set and the actual temperature to be displayed. The heated exhaust air is discharged from
the upper part of the device, either on the front or rear side, or one of the lateral surfaces of
the device.
The LABOCOOL laboratory cooler is table-top operated using the buttons on the front of
the device.
1.3
CE conformity
The laboratory cooler satis
fi
es the CE-marking criteria of the European Union:
- Low-Voltage Directive
- Electromagnetic Compatibility Directive
- RoHS Directive
in their currently valid versions.
The declaration of conformity can be requested from the manufacturer.