4
User Manual
IT8000 3/8” TIE
-LOK DATA TOOL
IT7000 1/4” TIE
-LOK DATA TOOL
ITC800 CONTROL SYSTEM
Document # P80080 Rev. C.3
© Copyright
BAND-IT-IDEX, Inc. 2024
All rights reserved
All rights reserved
BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street
Denver, CO 80216-3070 USA
P: 1-800-525-0758
SAFETY GUIDELINES AND WARRANTY
SAFETY INSTRUCTIONS
Read this manual to help you understand the intent and operation of this tool prior to installing BAND-IT Tie-Lok
® ties.
o
This product manual contains detailed instructions for setting up the tool and safely
installing ties.
o
Always wear safety glasses, appropriate gloves and safety shoes when operating this tool.
o
Keep hands away from tool head and clamp while operating.
o
Care should be taken to ensure fingers are not in the way of the clamp being applied.
o
Maintain the tool by following the scheduled preventative maintenance interval provided in
this document.
o
Never use this product for anything other than its original intended purpose.
IMPORTANT:
o
The object clamped and the 3/8" Tie-Lok® tie or
1/4“
Tie-Lok® tie must be compatible with each
other and the environment in which the final product will be used.
o
Always disconnect from air and electrical power sources before performing maintenance.
The IT8000 tool is designed for use with BAND-IT 3/8" Tie-Lok® ties only. The IT7000 tool is designed for use
with BAND-IT 1/4" Tie-Lok® ties only. Accordingly, BAND
–
IT
–
IDEX, Inc. makes no representations with respect
to the compatibility of these tools when used with non-BAND-IT or any other incompatible clamps.
WARRANTY
For warranty information go online at:
https://www.band-it-idex.com/en/terms-conditions
Save these instructions for future use.
This equipment has been tested by BAND-IT-IDEX and meets the requirement of stability during use, storage
conditions, transportation, assembly, dismantling when out of service, testing or foreseeable breakdowns
providing that the proper safety precautions are observed.