Band-it IT7000, User Manual, Page: 39 / 54

39
User Manual IT8000 3/8” TIE -LOK DATA TOOL
IT7000 1/4” TIE -LOK DATA TOOL
ITC800 CONTROL SYSTEM
Document # P80080 Rev. C.3
© Copyright
BAND-IT-IDEX, Inc. 2024
All rights reserved
All rights reserved
BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street
Denver, CO 80216-3070 USA
P: 1-800-525-0758
Figure 66
Figure 67
Settings Screen – Timing
Line up tool timeout – Time before error
between when tension is reached and when
the proximity sensors are activated.
Position Sensors Debounce – How long the
proximity sensors need to be in position before
the tool completes the cycle.
Cut off delay – Delay between punch and cut
Punch Extend Duration – Time the punch
cylinder is extended.
Auto Eject Duration – Time the tool runs after
cut (if automatic ejection is enabled)
Cut Retract Delay – Time the cut cylinder is
extended.
Settings Screen – Speeds
Max Tension Speed – Speed of tool during
installation
Slow speed – For standard operation, slow
speed is not used.
Eject Speed – Speed of ejection (if automatic
ejection is enabled)
Manual Jog Speed – Speed of motor jog in
manual mode.