25
User Manual
IT8000 3/8” TIE
-LOK DATA TOOL
IT7000 1/4” TIE
-LOK DATA TOOL
ITC800 CONTROL SYSTEM
Document # P80080 Rev. C.3
© Copyright
BAND-IT-IDEX, Inc. 2024
All rights reserved
All rights reserved
BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street
Denver, CO 80216-3070 USA
P: 1-800-525-0758
Figure 41
Figure 42
Recommended Setup:
For the most ergonimic design, we recommend moutning the tool on an articulating arm
or fixture.
Articulating Arms
•
Three 10-32 mounting holes are provided to attach the IT8000/IT7000 to an articulating arm.
•
The arm must be able to support approximately 10 lb. in addition to any brackets installed to the tool.
•
See page 26 for more information about controlling the tool in roll and yaw.
•
See Figures 41 & 42 for two examples of articulating arms.
Hanger
Loop
Mounting
Holes
Figure 39
Figure 40