Bamo BAMOPHOX 194, Instruction Manual

Page: 11 / 19

Page 11
194 M1 01 F 12-13-2013
ADJUST ALARM 1
ALARM 1 ON/OFF
ALARM 1 MEASURE/TEMP MEASURE = Threshold against measured value
TEMP. = Threshold against temperature measured value
ALARM 1 LOW/HIgH HIgH = Contact closes when value goes over the limit
LOW = Contact closes when the value goes under the limit
ON 00.00 ppm To close the contact S1 at this value
OFF 00.00 ppm To open the contact S1 at this value
DELAY UP ONI/OFF Delay (or no delay) before to close the contact S1
TIME 0000 SEC Delay time to close the contact S1
DELAY DOWN ON/OFF Delay (or no delay) before to open the contact S1
TIME 0000 SEC Delay time to open the contact S1
SAVINg ?
ADJUST ALARM 2
ALARM 2 ON/OFF
ALARM 2 MEASURE/TEMP MEASURE = Threshold against measured value
TEMP. = Threshold against temperature measured value
ALARM 2 LOW/HIgH HIgH = Contact closes when value goes over the limit
LOW = Contact closes when the value goes under the limit
ON 00.00 ppm To close the contact S2 at this value
OFF 00.00 ppm To open the contact S2 at this value
DELAY UP ONI/OFF Delay (or no delay) before to close the contact S2
TIME 0000 SEC Delay time to close the contact S2
DELAYDOWN ON/OFF Delay (or no delay) before to open the contact S2
TIME 0000 SEC Delay time to open the contact S2
SAVINg ?
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
VALID
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
VALID
MENU
+
Next menu: ADJUST ALARM 2
MENU
+
Next menu: ADJUST ALARM 3