BG 800 300 BE / A (0105) TPG 300
2
Product identification
When communicating with Balzers, the information given on the
product nameplate is required. Transfer therefore that information
to this manual.
Typ:
No:
F-No:
If your unit is supplied with the plug-in boards already installed,
there is an additional nameplate on it. Transfer that information
also to this manual.
Typ:
No:
F-No:
Validity
This manual applies to products with part number
BG 546 900 -T
The part number can be taken from the nameplate.
This manual is based on firmware version
BG 509 780 -F
Proceed according to paragraph 4.7.10 to check that your unit is
equipped with this or a higher firmware version (–F or higher).
Enter the firmware version number of your unit here:
BG 509 780 –
.......
The functions described as well as the illustrations and data con-
tained in this manual are subject to change without notice.
Intended use
Depending on which options have been chosen for it, the
TPG 300 can measure total pressure from atmosphere to
10
-11
mbar. It can trigger a number of pressure-dependent func-
tions to control and monitor vacuum devices and processes. The
instructions contained in this document must be strictly followed.
