BALZER FIELD FLOATER 6, User Manual

Page: 3 / 108

Field Floater 6 Grain Cart User Manual
Company Statements 1
Accuracy 1
To the Purchaser 1
Warranty Manufacture 1
Certificate of General Equipment Warranty 1
Liability for Delays 2
Contact Information 2
Warranty Registration 3
Safety 5
Mandatory Safety Shutdown Procedure 6
Additional Safety Reminders 7
Personal Safety 7
Towing Safety 7
Operation Safety 8
Vertical Auger Safety 8
Hydraulic System Safety 9
PTO Operation Safety 9
Safety Signs and Decals 10
Technical Data 11
Specifications 12
Dimensions 13
Operation 15
Pre-Operation Checks 16
Hydraulic Hose Color Markings 16
Attaching to Tractor 16
Initial Start Up 17
In-Field Procedure 17
PTO Drive System 18
Jack Storage 18
Independent Cross Axle Steering System 19
Suspension Hydraulics 19
Suspension Limits 22
Braking System 22
Brake Operation 22
Brake Fluid Level Check 22
Joystick Control System 22
Unloading Grain Cart 26
Running Lights 27
Grain Cart Weigh System 27
Grain Cart Weigh System Operation 30
Front Panel Controls 30
Quick Start Up and Use 31
Optional Roll Top Cover 32
Closing Roll Top Cover 32
Opening Roll Top Cover 33
Maintenance 35
Daily and Before Start of Season 36
Every 40 Hours of Operation 38
End of Season/Preparing for Storage 38
Steering System Lubrication 38
Hub Lubrication 38
Hitch Lubrication 38
PTO Shaft Lubrication Specifications 39
Suspension Height Adjustment 40
Steering Axle Toe Adjustment 40
Brake System 43
Adding Brake Fluid 43
Bleeding the Brake System 44
Automatic Oiler 45
Before Start of Season 45
Daily Maintenance Checks 45
End of Season/Preparing for Storage 45
Auger Drive System 46
Troubleshooting 49
Steering Not Working Correctly 50
Backing Up and Steering Not Locked Straight 50
Hydraulic Controls Not Working Properly 50
Brakes Not Working Properly 50
PTO Not Working 50
Automatic Oiler Not Working 51
Abnormal Auger Vibrations When Unloading 52
Upper Vertical Auger “Slams” Open 53
Joystick Will Not Work 53
Host Indicator Not Working/Error Codes 53
Scale Indicator Not Working/Error Codes 54
Weigh System Programming 57
Using Memory Locations 58
Naming a Memory Location 58
Storing to a Memory Location 59
Remove Weight from Memory Location 60
Recall a Memory Location 60
Export a Memory Location to USB 61
Export All Memory Locations to USB 61
Clear a Memory Location 62
Host Indicator Programming 62
Menu System Selection 62
Main Menu System 63
Clear All Memory Locations 63
Set Time and Date 64
Set Display Backlight 65
Set Weighing Units 65
Adjust Average Rate 65
Set Auto Power Off for Host Indicator 66
Set Hold Enable for Host Indicator 66
Set Print Continuous for Data Output 66
Set RS232 Port Baud Rate 67
Calibration Menu System 67
Set for Read Only Mode 68
Set Radio Enable 68
Set Radio Channel 68
Set Radio Channel Network ID 69
Set Radio Channel Encryption Key 69
Reset Radio to Default Settings 69
Scale Indicator Programming 70
Menu System Selection 71
Main Menu System 71
Set Display Backlight 71
Set Weighing Units 71
Adjust Average Rate 71
Set Auto Power Off for Scale Indicator 72
Set Hold Enable for Scale Indicator 72
Set RS232 Port Baud Rate 72
Calibration Menu System 72
Set Radio Enable 72
Set Radio Channel 72
Set Radio Channel Network ID 72
Set Radio Channel Encryption Key 73
Reset Radio to Default Settings 73
Set for Weigh Unit Changeable in Main Menu 73
Set Auto Zero Tracking 73
Set Graduation Size 73
Notes 75
INDEX