BALZER FIELD FLOATER 6, User Manual

Page: 67 / 108

63 Field Floater 6 Grain Cart User Manual
Main Menu System
The following options are accessible through the main menu system:
Display Function Definition
Clear All Clear stored data and custom settings
Set Time and Date Sets Time and Date for exported data
LCD Display Backlight Sets the backlight mode for the LCD display The red oval above the
display is a light sensor
Unit of Weight Sets the weighing unit between pounds and kilograms Changing units on
the Host Indicator will also change the units on the Scale Indicator
Average Rate The rate at which the output of the load cells is read by the Scale Indicator
This is in 1/4 second increments Changing the rate on the Host Indicator
will also change the rate on the Scale Indicator
Auto Off Amount of time (in minutes) before the weigh system turns off from
inactivity
Hold Enable Activates or deactivates the capability of locking the currently displayed
weight
Print Continuous Output the display continuously to an external display board or other
device connected to the RS232 port
Print Baud Rate The rate the RS232 output occurs This must match the rate of the device
attached to the RS232 port
Clear All Memory Locations
The following steps will clear saved weight accumulations in memory locations or resets ALL stored data and custom settings
to their default values
Step Button Entry Option Display
Clear Memory
Enter clearing code The default selection is for leaving the
memory as it was last set
Enter 9191 to clear all saved weight
accumulations
Select your entered clearing code
Display will show Lost indicating the
previously stored information has been
changed
WEIGH SYSTEM PROGRAMMING
Host Indicator Programming (Continued)