BALZER FIELD FLOATER 6, User Manual, Page: 40 / 108

36 Field Floater 6 Grain Cart User Manual
Daily and Before Start of Season
Before Starting Tractor
1 Check tires for damage and proper air pressure Repair or replace as needed Tire air pressure should be as listed in
Figure 45 below (for future reference check the box next to the tires on your machine) :
2 Torque all lug nuts to 450 ft/lbs (before first use after purchase, daily for the first five [5] days, before first use of season,
and after replacing tires)
3 Inspect suspension system for damage Repair or replace as needed
4 Inspect all hoses, connections, and reservoirs for leaks Repair or replace as needed
5 Check all oil and fluid reservoirs for proper levels Fill to proper level with the oil or fluid approved for that system
Figure 46 shows the reservoir for the automatic oiler The automatic oiler uses SAE 30 motor oil
MAINTENANCE
Tire Description Tire Pressure
o
28L X 26 R3 - 10 Bolt, 13 3/16” Bolt Circle 26 (180 kPa)
o
28LR26 R3 - 10 Bolt, 13 3/16” Bolt Circle 54 (372 kPa)
o
30 5x32 R1 - 10 Bolt, 13 3/16” Bolt Circle 33 (228 kPa)
o
30 5x32 R3 - 10 Bolt, 13 3/16” Bolt Circle 33 (228 kPa)
o
30 5LR32 R1 - 10 Bolt, 13 3/16” Bolt Circle 52 (359 kPa)
o
30 5LR32 R3 - 10 Bolt, 13 3/16” Bolt Circle 52 (359 kPa)
o
850/50 30 5 - 10 Bolt, 13 3/16” Bolt Circle, 10 Ply 37 (256 kPa)
o
900/60 32 R1 - 10 Bolt, 13 1/4” Bolt Circle 35 (241 kPa)
R3 - Diamond R1 - Lug
FIGURE 45
CAUTION
Before performing any maintenance on this machine,
turn off the tractor, remove the ignition key, and
relieve hydraulic pressure from the hydraulic systems
unless otherwise noted.
WARNING
Using oils and fluids other than those approved and
specified for each system may result in damage to the
machine.
FIGURE 46
Reservoir