baltur TBG 1100 MC, Instruction Manual For Installation, Use And Maintenance

Page: 40 / 64

DESIGN CHARACTERISTICS
Burners are composed by:
• Ventilating part in light aluminium alloy.
• Centrifugal fan for high performances.
• Intake air conveyor.
• Combustion head with partial recycling of exhaust gases at low
emissions of NOx.
• Flame inspection glass.
• Three-phase electric motor to run fan.
• Air pressure switch to ensure the presence of combustion air.
• Gas train complete with control valve, operating and safety valves,
valve seal control, minimum and maximum pressure switch,
pressure control and gas filter.
• Flame detection by means of ionisation electrode.
• Automatic burner command and control equipment with
microprocessor in compliance with European standard EN298
integrated with valve seal control.
• Control panel including on/off - automatic/manual operation
switches and minimum/maximum selector, operation and lock-out
indicator lights.
• Electrical system with protection rating IP54.
TECHNICAL FUNCTIONAL CHARACTERISTICS
• Gas burner compliant with the European standards EN 676 and
with the European Directives 2006/42/CE; 2014/30/UE; 2014/35/
UE; (UE) 2016/426.
• Operation at two progressive stages / modulating.
• Minimum and maximum air and fuel flow adjustment by means of
modulator with mechanical cam activated by an electric servomotor.
• Damper closing in pause to prevent any heat dispersion to the flue.
• Hinge opens both ways to permit convenient access to the mixer
without dismantling the burner from the boiler.
8 / 30
0006160212_202104
ENGLISH