![background image](http://html1.mh-extra.com/html/baltur/tbg-1100-mc/tbg-1100-mc_instruction-manual-for-installation-use-and-maintenance_3053924053.webp)
IONISATION CURRENT MEASUREMENT
The maximum ionisation current value required for a correct operation
of the equipment is indicated in the wiring diagram.
The normally detected current is significantly higher than the minimum
value in order to avoid unwanted blockages.
To measure ionisation current, connect a microammeter in series with
the ionisation electrode cable as shown in the figure.
DIAGRAM FOR REGULATING THE COMBUSTION HEAD AND THE ELECTRODE DISK DISTANCE
0002937680
B
2
A
1
3
4
5
3
4
5
2
1
3
1 - Ionisation electrode
2 - Ignition electrode
3 - Flame disc
4 - Mixer
5 - Gas delivery pipe
A
B
TBG 1100 ME / MC
20
5
21 / 30
0006160212_202104
ENGLISH
Summary of Contents for TBG 1100 MC
