baltur BPM 140 EVO, User Instruction Manual

Page: 52 / 116

24 / 30
0006081265_201212
ENGLISH
11 DISPLAY UNIT
11.1 Display modes overview
Mode Active if
Operation display during normal operation if no error occurs
Error display if the automatic device is switching off due to a fault
Information display pressing the keys (+ and ↵ ) in the status 1 or 35
Maintenance display pressing the keys (- and ↵ ) in the status 1 or 35
Error memory display pressing the keys (+ and ←) in the status 1 or 35
Parametrisation display pressing the keys (
↵
and ←) in the status 1 or 35
Reset display pressing the keys (- and ←) in the operation display
Entering the password for
parameters set stick
if a new parameters set has to be accepted
Flashing signal Possibility 1: access level change confirmation request
Possibility 2: keep the reset key pressed for more than
5 sec to intentionally restart the MPA.