baltur BPM 140 EVO, User Instruction Manual

Page: 49 / 116

21 / 30
0006081265_201212
ENGLISH
10 ERROR OVERVIEw
Error display
0 x 01
ERROR CODE
Space
F
internal
error
Error description Solution
MPA 51xx O System fault Replace the equipment
ID error internal
error
Error description Possible error cause
10.1 Processor 2 errors
F1 the display flashes
● No bus connection to processor 1 ? TWI bus line locked out due to a faulty external bus, for
example faulty VisionBox....
F2 the display flashes Wrong display ? The MPA 51xx has been connected to the AM03 display (only
for MPA 51). Correct: use AM08 or AM09
10.2 Basic system errors (from 0x01 to 0x3F)
0x01
● ERROR_INTERRUP_CYCL_STATE FRAME
0x02 ● ERROR_WD_ACTIVATION
0x03 ● ERROR_WD_HARDWARE
0x04 ERROR_RESET_UNAUTHORISED ? more than 5 resets in the last 15 minutes; solution: wait or
perform prolonged reset
0x05 ● ERROR_ROM_TEST
0x06 ● ERROR_RAM_TEST
0x07 ● ERROR_PIN SHORTCIRCUIT
0x08 ● ERROR_STACK_OVERFLOW
0x09 ● ERROR_PROGRAMMING
0x0A ● VARIABLE_ERROR
0x0B ● ERROR_ERROR IN TAB PROCESS
0x0C ● Free
0x0D ● ERROR_CPU_TEST
0x0E ● ERROR_EEPROM_PARAMETERS
0x0F ● ERROR_TEST_ADDRESS
0x10 ● Free
0x11 ERROR_UNDERVOLTAGE ? The permitted lower voltage limit has been briefly exceeded
0x12 ERROR_LOSS OF NETWORK ? The supply voltage has been interrupted during the start up,
operation or adjustment switch off.
0x13 ERROR_WD_STATUS ? The safety chain is not at zero
0x14 ● ERROR_TEST_SEGMENT
0x15 ● ERROR_TEST_SFR_REGISTER
0x16 ERROR_TWI_COMMUNICATION ? A TWI bus user has been connected or disconnected
from the bus while the MPA was disconnected from
the network. Solution: connect or disconnect the TWI
bus users only with the power supply disconnected.
? The are too many users connected to the TWI bus or the TWI
cable is subject to EMC disturbances. Solution: use wires that
are shorter or reduce the number of users
0x17 ● ERROR_OVERCHARGED_STATE FRAME
0x18 ERROR_ExTERNAL_APPLICATION A user has caused an external switch off for example selecting
the "Switch off" function in the PC software of the VisionBox
0x19 ● Free
0x1A ● ERROR_SWWD_DURING_INITIALISATION
0x1B ● ERROR_BUFFER OVERFLOW