The River, User Manual
PAGE
8
PAGE
8
Both encoders can be pressed. The corresponding function is written above each.
d. Controls synthesis.
d. Controls synthesis.
This part of the panel brings together all the commands assigned to the
sound synthesis.
These commands are enabled for the
This part of the panel brings together all the commands assigned to the
sound synthesis.
These commands are enabled for the
This part of the panel brings together all the commands assigned to the
sound synthesis.
These commands are enabled for the
selected channel (see above) or optionally for all channels if the mode
ALL
is selected, or a channel redirection is defined (see
selected channel (see above) or optionally for all channels if the mode
ALL
is selected, or a channel redirection is defined (see
selected channel (see above) or optionally for all channels if the mode
ALL
is selected, or a channel redirection is defined (see
Propagation All commands and redirection).
When you change a setting, the display shows the new value and the original value. This allows you to easily return to the
old setting.
Some controls adjust both parameters (example: EMPHASIS EMPHASIS and Modulation by DLFO). In this case, the
second function is indicated under the control preceded by
*
S.
second function is indicated under the control preceded by
*
S.
second function is indicated under the control preceded by
*
S.
To access the secondary function, use the button
*
S (
see
The Shift button). As long as you press the Command, Shift mode is
To access the secondary function, use the button
*
S (
see
The Shift button). As long as you press the Command, Shift mode is
To access the secondary function, use the button
*
S (
see
The Shift button). As long as you press the Command, Shift mode is
To access the secondary function, use the button
*
S (
see
The Shift button). As long as you press the Command, Shift mode is
To access the secondary function, use the button
*
S (
see
The Shift button). As long as you press the Command, Shift mode is
To access the secondary function, use the button
*
S (
see
The Shift button). As long as you press the Command, Shift mode is
extended as necessary.
For rank oscillators and waveforms, the buttons are exclusive useless to try to have two waveforms to the output of an
oscillator ••
oscillator ••
To access the Rank 4 'oscillators, you press twice the range 8. In this case, the buttons of the rows 16 'and 8' are illuminated,
indicating the choice of rank 4 ' ••
indicating the choice of rank 4 ' ••
e. The Riverkey, the manager of the inputs / outputs game
e. The Riverkey, the manager of the inputs / outputs game
The left side of The River is reserved for the headphone jack and level control. On the right, the Riverkey The control screen is
framed by two encoders.
Almost all settings can be done with these encoders.