The River, User Manual
PAGE
23
PAGE
23
11. Page Chorus 1..3
11. Page Chorus 1..3
press
*
S CHOR1 to access the Chorus setting screen 1 Press
*
S CHOR2 to
press
*
S CHOR1 to access the Chorus setting screen 1 Press
*
S CHOR2 to
press
*
S CHOR1 to access the Chorus setting screen 1 Press
*
S CHOR2 to
press
*
S CHOR1 to access the Chorus setting screen 1 Press
*
S CHOR2 to
press
*
S CHOR1 to access the Chorus setting screen 1 Press
*
S CHOR2 to
access the setting page Chorus 2 Press
*
S CHOR3 to access the setting
access the setting page Chorus 2 Press
*
S CHOR3 to access the setting
access the setting page Chorus 2 Press
*
S CHOR3 to access the setting
page Chorus 3
The encoders 1 to 7 provide access to the following settings.
1
LEVEL (Off - 50 ...
0 ... + 10)
Chorus Output Level
2 PAN (16 <... 0 ...> 16)
Release of panning of each chorus
3 WAVEFORM
waveform modulation Delay: No
Sin no modulation
sine Star
Squ
triangle
square S & H Sample &
Hold Rnd random modulation Tap
simulation of the variation in speed of an echo bands. For added
realism, the latter modulation was modeled from a vintage tape echo.
ch2
Synchronizing Chorus 1 or 3 with the Chorus 2
4 RATE (0 ... 360)
Speed modulation. If WAVEFORM = Ch2, ie it is synchronized with the Chorus
Chorus 2, this adjusts the phase shift degree of the modulation of the chorus
relative to Chorus 2
5 DELAY (0-200)
Delay introduced by the BBD. This corresponds to a delay between 2 ms and 50 ms.
6 RANGE
(0 ... 100)
Amplitude modulation. If WAVEFORM = Ch2, ie that is synchronized with the chorus
chorus 2, this parameter is inactive because substituted by one chorus 2. The amplitude
of the modulation is corrected so that the delay adjustment associated with that of the
modulation remains in the control range.
7 FLANGER (Yes / No)
Available only on the Chorus 2, this option enables specific loopback signal to
obtain a Flanger-like effect (comb filter).
8 PARAM (
Off .. + 10)
8 PARAM (
Off .. + 10)
For Echos, adjusts the level of the "second reading head." For the
Ping-Pong, adjusts the amplitude of the "stereo" For reverbs, sets the
pre-delay