The River, User Manual
PAGE
18
PAGE
18
*
S TRACKING (NORMAL, TRACKING)
Switches the answer mode potentiometers. In Normal mode, the values are jumping on the physical position of a potentiometer
as soon as one the move. In TRACKING mode, the values move when the knob passes by the stored value.
UNISON
You can link all voices of a channel. The game becomes monophonic. The command
DETUNE
will detune the voices and
You can link all voices of a channel. The game becomes monophonic. The command
DETUNE
will detune the voices and
You can link all voices of a channel. The game becomes monophonic. The command
DETUNE
will detune the voices and
bigger sound. This button also allows access to the function
COMPARE (
COMPARE see Function).
bigger sound. This button also allows access to the function
COMPARE (
COMPARE see Function).
bigger sound. This button also allows access to the function
COMPARE (
COMPARE see Function).
Remember to put the detune controls to zero if you leave the UNISON mode because the detune remains active, and
there you will feel your River is completely out of tune.
S PANEL
Load the physical values being potentiometers, for from the current state of the panel. For from a basic sound, load one of INIT
programs (SINGLE or MULTI).
2. Load SINGLE or FX
2. Load SINGLE or FX
Check that the selected channel is good that you want to change and that at least one vote is assigned to that channel. press
*
S
Check that the selected channel is good that you want to change and that at least one vote is assigned to that channel. press
*
S
Check that the selected channel is good that you want to change and that at least one vote is assigned to that channel. press
*
S
LOAD SINGLE to access this menu. Select the location using encoders
BANK (
01-08, FX01-FX02) and
SOUND (
10-20). The
LOAD SINGLE to access this menu. Select the location using encoders
BANK (
01-08, FX01-FX02) and
SOUND (
10-20). The
LOAD SINGLE to access this menu. Select the location using encoders
BANK (
01-08, FX01-FX02) and
SOUND (
10-20). The
LOAD SINGLE to access this menu. Select the location using encoders
BANK (
01-08, FX01-FX02) and
SOUND (
10-20). The
LOAD SINGLE to access this menu. Select the location using encoders
BANK (
01-08, FX01-FX02) and
SOUND (
10-20). The
first 8 are reserved to banks
SINGLE,
the last 2 to banks
FX.
first 8 are reserved to banks
SINGLE,
the last 2 to banks
FX.
first 8 are reserved to banks
SINGLE,
the last 2 to banks
FX.
first 8 are reserved to banks
SINGLE,
the last 2 to banks
FX.
Beware, there is no confirmation requested for playing a sound. The channel current settings will be replaced.
Press encoder
left
to load the sound in the selected channel without changing the settings of effects or the encoder
law
to load
Press encoder
left
to load the sound in the selected channel without changing the settings of effects or the encoder
law
to load
Press encoder
left
to load the sound in the selected channel without changing the settings of effects or the encoder
law
to load
Press encoder
left
to load the sound in the selected channel without changing the settings of effects or the encoder
law
to load
Press encoder
left
to load the sound in the selected channel without changing the settings of effects or the encoder
law
to load
the selected sound and apply its effect settings. Wait until the disappearance of the WAIT message before continuing.
3. Saving SINGLE
3. Saving SINGLE
press
*
S
SAVE SINGLE to access this menu.
press
*
S
SAVE SINGLE to access this menu.
press
*
S
SAVE SINGLE to access this menu.
press
*
S
SAVE SINGLE to access this menu.
Select the destination using encoders
BANK (
01-08, FX01-FX02) and
SOUND (
10-20). The first 8 banks are reserved for
Select the destination using encoders
BANK (
01-08, FX01-FX02) and
SOUND (
10-20). The first 8 banks are reserved for
Select the destination using encoders
BANK (
01-08, FX01-FX02) and
SOUND (
10-20). The first 8 banks are reserved for
Select the destination using encoders
BANK (
01-08, FX01-FX02) and
SOUND (
10-20). The first 8 banks are reserved for
Select the destination using encoders
BANK (
01-08, FX01-FX02) and
SOUND (
10-20). The first 8 banks are reserved for
programs the last 2 banks (FX) are reserved to the effects and record only the effect settings.
Name the program using the row of eight encoder (encoder 1 by letter / digit).
By pressing and
*
S
the name of the selected location will be copied into the editing area. If you change the selection (bank's)
By pressing and
*
S
the name of the selected location will be copied into the editing area. If you change the selection (bank's)
By pressing and
*
S
the name of the selected location will be copied into the editing area. If you change the selection (bank's)
By pressing and
*
S
the name of the selected location will be copied into the editing area. If you change the selection (bank's)
to copy a name, be sure to re-select the target location before confirming his backup.
Beware, there is no confirmation requested for saving a SINGLE. The program in memory in this location will be
permanently replaced.
Confirm the backup by pushing one of the encoders. Wait until the disappearance of
the WAIT message before continuing.
