Baloran The River, User Manual

Page: 23 / 51

The River, User Manual
PAGE 22 PAGE 22
8. You do not 8. You do not
press * S TUNE to access the management of the Autotune. press * S TUNE to access the management of the Autotune. press * S TUNE to access the management of the Autotune. press * S TUNE to access the management of the Autotune.
The River has a tuning algorithm of the oscillators and filters depending on the temperature. It continuously measures the
temperature inside the instrument (this temperature is displayed on the last line of the screen) and adjusts the steering of
voice cards based on this temperature.
make a Autotune ALL 20 °, 25 °, 30 °, 25 °, 40 ° is expected to have The River right in all situations. It is also important to make a Autotune ALL 20 °, 25 °, 30 °, 25 °, 40 ° is expected to have The River right in all situations. It is also important to make a Autotune ALL 20 °, 25 °, 30 °, 25 °, 40 ° is expected to have The River right in all situations. It is also important to
let the instrument warm twenty minutes after power before performing Autotune ALL. let the instrument warm twenty minutes after power before performing Autotune ALL.
For intermediate temperatures, The River will interpolate adjustments compared to those he has already registered. If a voice
drift a bit compared to others, you can start a
Autotune V1..8 drift a bit compared to others, you can start a Autotune V1..8
only that voice.
The Autotune ALL lasts just over 2 minutes. Thank you not to touch the keyboard and controls until the disappearance of the WAIT The Autotune ALL lasts just over 2 minutes. Thank you not to touch the keyboard and controls until the disappearance of the WAIT The Autotune ALL lasts just over 2 minutes. Thank you not to touch the keyboard and controls until the disappearance of the WAIT
message.
RESET AUTOTUNE resets the table. After executing this function, your The River works without Autotune. We must RESET AUTOTUNE resets the table. After executing this function, your The River works without Autotune. We must
therefore quickly with enchainer Autotune ALL •• therefore quickly with enchainer Autotune ALL •• therefore quickly with enchainer Autotune ALL ••
This function is also recommended after each updating firmwares.
DIAGNOS LEDS
Enable the voice activity indicator. Yes Yes, the red buttons in the first row flash briefly when the corresponding Voice is Enable the voice activity indicator. Yes Yes, the red buttons in the first row flash briefly when the corresponding Voice is Enable the voice activity indicator. Yes Yes, the red buttons in the first row flash briefly when the corresponding Voice is
activated. Yes No, those red buttons indicate the activity of the corresponding channels. activated. Yes No, those red buttons indicate the activity of the corresponding channels. activated. Yes No, those red buttons indicate the activity of the corresponding channels.
9. page Level 9. page Level
press * S LEVEL to access the setting page of the entry-level voice cards. press * S LEVEL to access the setting page of the entry-level voice cards. press * S LEVEL to access the setting page of the entry-level voice cards.
This setting is very important.
Each chorus uses a BBD, analog component, which quickly saturates if the output level of the voice
This setting is very important.
Each chorus uses a BBD, analog component, which quickly saturates if the output level of the voice
is too high. Conversely, if the level is set too low, the signal / noise ratio can be very bad. We must therefore seek the highest
level before the onset of saturation and, of course, for the most "sound" game of your settings (electroplate complex agreements
etc ...)
Each encoder sets dB attenuation of the corresponding voice.
To adjust the voices of the same channel at the same time, use * S + the channel encoder. To adjust the voices of the same channel at the same time, use * S + the channel encoder. To adjust the voices of the same channel at the same time, use * S + the channel encoder.
10. Pan page 10. Pan page
press * S PAN to access the panoramic setting screen voice cards. press * S PAN to access the panoramic setting screen voice cards. press * S PAN to access the panoramic setting screen voice cards.
Each encoder sets the panoramic placement of the corresponding voice.
To adjust the voices of the same channel at the same time, use * S + the channel encoder. To adjust the voices of the same channel at the same time, use * S + the channel encoder. To adjust the voices of the same channel at the same time, use * S + the channel encoder.