Balluff BVS HS-QB-SDR-MA-02-02, Operation Manual

Page: 113 / 296

113
www.balluff.com
BVS HS-Q Series
Standard Hand Held Barcode Reader
Enter/Exit Programming Mode
4
Configuration Using Barcodes
Code 39 Set Length 2
This feature specifies one of the barcode lengths for Code 39 Length Control on page 111 .
Length 2 is the maximum label length if in Variable Length: For variable length decoding, a mini-
mum and maximum length may be set. on page 111 Mode, or the second fixed length if in Fixed
Length: For fixed length decoding, two different lengths may be set. on page 111 Mode. Length
includes the barcode’s check, data, and full-ASCII shift characters. The length does not include
start/stop characters.
Table Code 39 Length 2 Setting Examples provides examples for setting Length 2. See page 232
for detailed instructions on setting this feature.
Code 39
Length 2 Setting
Examples
STEP ACTION EXAMPLES
1 Desired Setting
00 (Ignore
This Length)
07 Characters 15 Characters 50 Characters
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT CODE 39 LENGTH 2 SETTING
4
Scan Two
Characters
From
Appendix
18, Use the
barcodes in this
appendix to enter
numbers as you
would select
digits/characters
from a keypad.
‘0’ and ‘0’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’
5 Scan ENTER/EXIT PROGRAMMING .MODE
$CC3L2
Select Code 39 Length 2 Setting
Make a mistake? Scan the CANCEL barcode
to abort and not save the entry string. You can
then start again at the beginning.
~
CANCEL
DEFAULT
50 = Length 2 is 50 Characters