215
www.balluff.com
BVS HS-Q Series
Standard Hand Held Barcode Reader
Enter/Exit Programming Mode
4
Configuration Using Barcodes
Batch Features
Batch Mode
This option specifies whether to store labels in the handheld while disconnected from the base.
Options are as follows:
- Disabled — The handheld will not store/batch labels.
- Automatic — The handheld will store labels to RAM when the handheld goes out of range and
is disconnected from the remote device.
- Manual — The handheld will always store labels to Flash memory. The user must manually
send the stored labels to the remote device using a special "batch send" label.
DEFAULT
$CBTBM00(C
Batch Mode = Disabled
$CBTBM01(C
Batch Mode = Automatic
$CBTBM02(C
Batch Mode = Manual
Send Batch
When the reader is configured in Manual Batch Mode, use the following barcode to initiate send-
ing of labels stored in batch memory.
BatchSend
Send Batch
Do not scan an ENTER/EXIT PROGRAMMING MODE label in conjunction
with this barcode.
