Balluff BVS HS-P Series Operation Manual Download

Page: 94 / 314

Configuration Using Barcodes

Balluff BVS HS-P Family
Industrial Handheld Barcode Readers

3.8.4 GTIN

Formatting

This feature enables/disables the ability to convert UPC-E, UPC-A, EAN 8, and EAN 13 labels into
the GTIN 14-character format.

NOTE

If add-on information is present on the base label prior to the conversion

taking place, the add-on information will be appended to the converted

GTIN label.

GTIN Formatting = Disable

GTIN Formatting = Enable

DEFAULT

CGBEN00(C

CGBEN01(C

Summary of Contents for BVS HS-P Series



























































































































































































































































































































Search results

Summary of Contents for BVS HS-P Series

Reviews:

Related manuals for BVS HS-P Series

Brands by name

Popular brands

Balluff BVS HS-P Series, Operation Manual

Search results

Summary of Contents for BVS HS-P Series

Reviews:

Related manuals for BVS HS-P Series

Brands by name

Popular brands