Balluff BVS HS-P Series, Operation Manual

Page: 222 / 314

222
3
Configuration Using Barcodes
Balluff BVS HS-P Family
Industrial Handheld Barcode Readers
Date-Time
Separator Sets the character used to separate Date and Time from the next field in message.
Disable Date-Time Separator
Set Character Separator =
To configure this feature, scan the ENTER/
EXIT PROGRAMMING MODE barcode
above, then the barcode at left followed by 2
digits from the Alphanumeric characters in
Appendix D: Keypad representing your
desired character(s). End by reading the
ENTER/EXIT barcode again.
Make a mistake? Scan the CANCEL barcode
to abort and not save the entry string. You
can then start again at the beginning.
CANCEL
DEFAULT
$CRFTD0000\r
$CRFTD01\r
~