Balluff BVS HS-P Series Page 101 Operation Manual Download

Page: 101 / 314

101

www.balluff.com

Configuration Using Barcodes

Balluff BVS HS-P Family
Industrial Handheld Barcode Readers

3.8.10 Add-Ons

Contact Customer Support for advanced programming of optional and conditional add-ons.

Optional Add-
ons

The reader can be enabled to optionally read the following add-ons (supplementals):

NOTE

If a UPC/EAN base label and an add-on are both decoded, the reader will
transmit the base label and add-on. If a UPC/EAN base label is decoded

without an add-on, the base label will be transmitted without an add-on.

Conditional add-on settings (if enabled) are considered by the reader before

optional add-on settings.

Optional Add-Ons = Disable P2

Optional Add-Ons = Enable P2

Optional Add-Ons = Disable P5

Optional Add-Ons = Enable P5

Optional Add-Ons = Disable GS1-128

Optional Add-Ons = Enable GS1-128

DEFAULT

ADO200(CR

ADO201(CR

DEFAULT

ADO500(CR

ADO501(CR

DEFAULT

ADO800(CR

ADO801(CR

Summary of Contents for BVS HS-P Series



























































































































































































































































































































Search results

Summary of Contents for BVS HS-P Series

Reviews:

Related manuals for BVS HS-P Series

Brands by name

Popular brands

Balluff BVS HS-P Series, Operation Manual

Search results

Summary of Contents for BVS HS-P Series

Reviews:

Related manuals for BVS HS-P Series

Brands by name

Popular brands