Balluff BVS HS-P Series, Operation Manual

Page: 175 / 314

175
www.balluff.com
3
Configuration Using Barcodes
Balluff BVS HS-P Family
Industrial Handheld Barcode Readers
3 Configuration Using Barcodes
3.9 2D Symbologies
The reader supports the following 2D symbologies (barcode types). Symbology-dependent
options for each symbology are included in this chapter. See
"1D Symbologies" starting on
page 87 for configuration of 1D barcodes.
3.9.1 2D Global
Features The following features are common to all, or in some cases, most of the available 2D symbolo-
gies. Default settings are indicated at each feature/option with a green arrow. Also reference
Appendix C: Standard Defaults for a listing of the most widely used set of standard factory set-
tings. That section also provides space to record any custom settings needed or implemented for
your system.
To set most features:
1 Scan the ENTER/EXIT PROGRAMMING barcode at the top of applicable programming
pages.
2 Scan the correct barcode to set the desired programming feature or parameter. You may need
to cover unused barcodes on the page, and possibly the facing page, to ensure that the
reader reads only the barcode you intend to scan.
3 If additional input parameters are needed, go to Appendix D: Keypad , and scan the appropri-
ate characters from the keypad.
Complete the programming sequence by reading the ENTER/EXIT PROGRAMMING barcode to
exit Programming Mode.
2D Global Features
2D Maximum Decoding Time on page 176 2D Normal/Inverse Symbol Control on page 177
2D Structured Append on page 177
Aztec Code on page 178 Micro PDF417 on page 191
China Sensible Code on page 180 QR Code on page 194
Data Matrix on page 182 Micro QR Code on page 196
Maxicode on page 186 UCC Composite on page 198
PDF417 on page 189 Postal Code Selection on page 200
NOTE
Additional information about many features can be found in the “References”
chapter.
If you make a mistake before the last character, scan the CANCEL barcode to
abort and not save the entry string. You can then start again at the beginning.