Balluff BVS HS-P Series, Operation Manual

Page: 287 / 314

287
www.balluff.com
7
Appendix C: Standard Defaults
Balluff BVS HS-P Family
Industrial Handheld Barcode Readers
7 Appendix C: Standard Defaults
The most common configuration settings are listed in the “Default” column of the table below.
Page references are also provided for feature descriptions and programming barcodes for each
parameter. A column has also been provided for recording of your preferred default settings for
these same configurable features.
Standard
Defaults
Parameter Default Your Setting
Page
Number
GLOBAL INTERFACE FEATURES
Host Commands — Obey/Ignore Obey 32
USB Suspend Mode Disable 32
RS-232 ONLY
Baud Rate 115200 34
Data Bits 8 Data Bits 35
Stop Bits 1 Stop Bit 35
Parity None 35
Handshaking Control RTS 36
RS-232/USB-Com
Intercharacter Delay No Delay 38
Beep On ASCII BELBeep On ASCII BEL Disable 38
Beep On Not on File Enable 39
ACK NAK Options Disable 39
ACK Character ‘ACK’ 40
NAK Character ‘NAK’ 40
ACK NAK Timeout Value 200 ms 41
ACK NAK Retry Count 3 Retries 41
ACK NAK Error Handling
Ignore Errors
Detected
42
Indicate Transmission Failure Enable 42
Disable Character ‘D’ 43
Enable Character ‘E’ 43
KEYBOARD WEDGE
Country Mode U.S. Keyboard 46
Send Control Characters 00 49