BTL5-T1_ _-M_ _ _ _-B/Z-S103
Micropulse Linear Transducer - Rod Style
10
english
7
Configuration (cont.)
The station address configured on
the BTL is set under the parameter
'PROFIBUS-Address'. Values from
0-125 are allowed. For better identi-
fication a name can be entered for
Fig. 7-6: 'Slave Properties' menu with BTL5-T
Fig. 7-7: Configuration menu (no parameter set)
the BTL in the 'Station name' field.
If there is more than one Master in
the network the selection box
'Param. assign. master' can be
used to select a Master which sets
th eparameters for the BTL upon
system start.
The [ Configuration ] button is used
to open the dialog for BTL param-
eterizing.
➥
➥
➥
➥
➥
Fig. 7-7
Since the BTL5-T is a modular de-
vice there is no active parameter
record shown in the illustration. For
this reason the first step must be to
select an appropriate parameter
module. Activate the selection list
by clicking on the [ Module ] button.
➥
➥
➥
➥
➥
Fig. 7-8
