www.balluff.com
BIS V-6111 CC-Link
Processor unit
5
english
The BIS V-6111 processor unit is a component of the BIS V Identification System. Within the
identification system it is used for linking to a host computer (PLC, PC). It may be used only for
this purpose in an industrial environment corresponding to Class A of the EMC Law.
This description applies to processor units of the following series:
– BIS V-6111-073-C003
– BIS V-6111-073-C103
Installation and startup
Installation and startup are to be performed by trained technical personnel only. Any damage
resulting from unauthorized manipulation or improper use voids warranty and liability claims
against the manufacturer.
When connecting the processor unit to an external controller, observe proper selection and
polarity of the connection as well as the power supply
(see “Processor Unit Installation” on
page 9)
.
The processor unit may only be used with an approved power supply
(see “Technical Data” on
page 12)
.
Conformity
This product was developed and manufactured in accordance with the
applicable European directives.
CE conformity has been verified.
All approvals and certifications are no longer valid if:
– Components are used that are not part of the BIS V Identification System,
– Components are used that have not been explicitly approved by Balluff.
Operation and testing
The operator is responsible for ensuring that local safety regulations are observed.
In the event of defects and non-correctable faults in the identification system, take the system
out of service and secure it from unauthorized use.
Caution!
The pictogram used with the word "Caution" warns of a situation that could harm
someone's health or damage equipment. Failure to observe these warning notes may
result in injury or damage to equipment.
►
Always observe the described measures for preventing this danger.
2.1 Intended Use
2.2 General Safety
Notes
2.3 Meaning of
Warning Notes
2
Safety
