Balluff BCS Q40BBAA-PIM20C-EP-GS04 Series, Configuration Manual

Page: 140 / 172

54 english
Switching Counter Input
With
Switching Counter Input
, the internal binary signal
source can be selected. Input contains a list of the internal
binary signals (see Tab. 6-3 on page 42).
Switching Counter Mode
With Switching Counter Mode , the current mode of the
counter function can be selected.
Value Meaning Description
0x00 (0) Deactivated Deactivated
0x01 (1) Static Static counter function
0x02 (2) Auto Auto counter function
Tab. 6-16: Switching Counter – Switching Counter Mode
Switching Counter Limit
With Switching Counter Limit , the count limit for the
counter can be set. The value range is between 0x0002 (2)
and 0xFFFF (65535).
Switching Counter Detection Type
With Switching Counter Detection Type the current type of
counting can be selected.
Value Meaning Description
0x00 (0) Rising Edge Counter is incremented with
rising edge (from 0/false to 1/
true)
0x01 (1) Falling Edge Counter is incremented with
falling edge (from 1/true to 0/
false)
0x02 (2) Both Edges Counter is incremented for
each edge
Tab. 6-17: Switching Counter – Switching Counter Detection Type
Switching Counter Startup Delay
With Switching Counter Startup Delay , the time for the
startup delay can be set. The startup delay begins after the
supply voltage is switched on. During the startup delay,
the counter has no function. The counter starts after the
startup delay has elapsed. The value represents the time in
seconds. The value range is between 0x00 (0) and 0xFF
(255). A value of 0x00 (0) represents no start delay.
6
Secondary Device Functions (continued)
Switching Counter State
With Switching Counter State , the current status can be
read.
Value Meaning Description
0x00 (0) Not reached Value is less than Limit .
0x01 (1) reached Value is greater than or equal to
Limit .
0x03 (3) exceeded Value is greater than Limit .
0x08 (8) Startup
Delay
Startup delay currently running.
0xFF
(255)
Deactivated Feature is deactivated.
Tab. 6-18: Switching Counter – Switching Counter State
Switching Counter Value
With Switching Counter Value , the current counter value
can be read.
Switching Counter Reset
With Switching Counter Reset individual or all channels
can be reset by resetting the counter value and the flags.
Value Meaning Description
0x01 (1) Channel 1
Reset
Channel 1 is reset
0x02 (2) Channel 2
Reset
Channel 2 is reset
0x03 (3) Channel 3
Reset
Channel 3 is reset
0x04 (4) Channel 4
Reset
Channel 4 is reset
0xFF
(255)
Channel All
Reset
All channels are reset
Tab. 6-19: Switching Counter – Switching Counter Reset
6.3.5 System Commands
Command
Value
Device Action
0x81 (129)
Application Reset
– Resets writable
parameters to the default value.
0x82 (130) Restore Factory Settings – Resets
writable parameters to the default value.
0xA6 (166) Switching Counter Reset – Resets
counter value and flags.
Tab. 6-20: Switching counter – System Commands
For an overview of all System Commands, see section 3.5
on page 21.
BCS Q40BBAA-PIM20C-EP _ _ _ -GS04
Capacitive Proximity Switches