Balluff BCS Q40BBAA-PIM20C-EP-GS04 Series, Configuration Manual

Page: 107 / 172

www.balluff.com 21 english
3.5 System Commands
Command
Value
Device Action
0x40 (64) Teach Apply – Calculates the switching point for SP1, SP2.
0x41 (65) Teach SP1 – Determines teach point 1 for setpoint 1 and calculates the switching point.
0x42 (66) Teach SP2 – Determines Teachpoint 1 for Setpoint 2 and calculates the switching point.
0x43 (67) Teach SP1 TP1 – Determines Teachpoint 1 for Setpoint 1.
0x44 (68) Teach SP1 TP2 – Determines Teachpoint 2 for Setpoint 1.
0x45 (69) Teach SP2 TP1 – Determines Teachpoint 1 for Setpoint 2.
0x46 (70) Teach SP2 TP2 – Determines Teachpoint 2 for Setpoint 2.
0x47 (71) Teach SP1 Start – Starts dynamic teach-in for Setpoint 1.
0x48 (72) Teach SP1 Stop – Stops dynamic teach-in for setpoint 1 and calculates the switching point.
0x49 (73) Teach SP2 Start – Starts dynamic teach-in for Setpoint 2.
0x4A (74) Teach SP2 Stop – Stops dynamic teach-in for Setpoint 2 and calculates the switching point.
0x4E (78) Teach Reset – The teach-in process is interrupted, the setpoints are reset to the default settings.
0x4F (79) Teach Cancel – The teach-in process is interrupted.
0x80 (128)
Device Reset
– Performs a warm start of the device. During this process, the microcontrollers are
restarted and all initializations performed again without any change made to the parameter values (see
section 7.3 on page 72).
0x81 (129) Application Reset (see chapter 7.3 on page 72)
0x82 (130) Restore Factory Settings (see section 7.3 on page 72)
0xA5 (165) Maintenance Reset (see chapter 7.3 on page 72)
0xA6 (166) Switching Counter Reset – Resets counter value and flags.
0xAF (175)
Start Device Discovery
0xB1 (177) Fine Adjust near – Adjusts the switching point one step closer to the sensor.
0xB2 (178) Fine Adjust far – Adjusts the switching point one step further from the sensor.
0xC1 (193) Acknowledge User Parameter Reset – Confirms acknowledgment of the message and restoration of
the correct device parameterization.
Tab. 3-8: System Commands – Overview
3
Overview of IO-Link Data and Functions (continued)
BCS Q40BBAA-PIM20C-EP _ _ _ -GS04
Capacitive Proximity Switches