Balluff BCS Q40BBAA-PIM20C-EP-GS04 Series, Configuration Manual

Page: 110 / 172

24 english
The basic IO-Link specification of the standard variant
AdSS is described in Tab. 4-1.
Specification IO-Link Description Value
Transfer rate COM COM2 (38.4 kBaud)
Minimum cycle time of device min cycle time 0x32 (5 ms)
Frame specification: M-Sequence Capability: 0×1B
– Amount of Preoperate on demand data
required
– Number of On-demand Data in
Preoperate
2 Bytes
– Amount of Operate on demand data required – Number of On-demand Data in
Operate
2 Bytes
– ISDU – ISDU supported Supported
IO-Link protocol version Revision ID 0×11 (Version 1.1)
Amount of process data from the device to the
master
ProcessDataIn 0x48 (1 Byte)
Amount of process data from the master to the
device
ProcessDataOut 0×00 (0 Bit)
Manufacturer ID Vendor ID 0×378
Device identification Device ID 0x07021D (459293)
Tab. 4-1: Communication parameters
In order to flexibly adapt the basic communication
parameters to the application, other device variants can
also be adjusted (see Tab. 4-2 on page 24).
The following device variants can be selected (also see
chapter 7.4 on page 73):
Variant name Device
identifier
Transfer
rate
Minimum
cycle time
of device
Frame specification
(Number of
Preoperate on
demand data
required / Number
of Operate on
demand data
required / ISDU)
IO-Link
protocol
version
Quantity of
process data
Device
to
master
Master
to
device
AdSS 0x07021D COM2
(38.4 kBaud)
5 ms 0x1B (2 Bytes/ 2
Bytes/supported)
0x11
(Version 1.1)
1 Byte 0 Bit
LSCC 0x07021E COM3
(230.4 kBaud)
5 ms 0x19 (4 Bytes/ 1 Byte/
supported)
0x11
(Version 1.1)
3 Bytes 0 Bit
CM 0x07021F COM2
(38.4 kBaud)
10 ms 0x19 (4 Bytes/ 1 Byte/
supported)
0x11
(Version 1.1)
17 Bytes 0 Bit
Tab. 4-2: Communication parameters – Device variants
4
Communication parameters
BCS Q40BBAA-PIM20C-EP _ _ _ -GS04
Capacitive Proximity Switches