Balluff BAE SC-TL-F03, User Manual

Page: 86 / 118

www.balluff.com
26
Preselection 3 Menu
MODE 3
Switching conditions for preselection 3. see chapter PRESELECTION 1 MENU (except the trailing
value).
See chapter PRESELECTION 1 MENU
6
RES>=PRES-
TRAIL
Trailing PRESELECTION 3:
Display value is greater or equal PRESELECTION 3 – PRESELECTION 6
→
ON,
PRESELECTION 6 is the trailing value from PRESELECTION 3
HYSTERESIS 3
This parameter defines the switching hysteresis of the switch-off point for preselection 3.
See chapter PRESELECTION 1 MENU.
PULSE TIME 3 (S)
Duration of output pulse for the switching condition of preselection 3.
See chapter PRESELECTION 1 MENU.
OUTPUT TARGET 3
Assignment of an output for the switching condition of preselection 3.
See chapter PRESELECTION 1 MENU.
0 NO No assignment
1 CTRL OUT 1 Switching condition assigned to “Ctrl. Out 1”
2 CTRL OUT 2
Switching condition assigned to “Ctrl. Out 2”
3 CTRL OUT 3
Switching condition assigned to “Ctrl. Out 3”
4 CTRL OUT 4
Switching condition assigned to “Ctrl. Out 4”
5 CTRL OUT 5
Switching condition assigned to “Ctrl. Out 5”
6 CTRL OUT 6
Switching condition assigned to “Ctrl. Out 6”
OUTPUT POLARITY 3
Polarity for the switching condition of preselection 3.
See chapter PRESELECTION 1 MENU.
OUTPUT LOCK 3
Latch for the switching condition of preselection 3.
See chapter PRESELECTION 1 MENU.
START UP DELAY 3 (S)
Start-up suppression for the switching condition of preselection 3.
See chapter PRESELECTION 1 MENU.