Balluff BAE SC-TL-F03, User Manual

Page: 85 / 118

www.balluff.com
25
Preselection 2 Menu
MODE 2
Switching conditions for preselection 2., see chapter PRESELECTION 1 MENU (except the trailing
value)
See chapter PRESELECTION 1 MENU
6
RES>=PRES-
TRAIL
Trailing PRESELECTION 2:
Display value is greater or equal PRESELECTION 2 – PRESELECTION 5
→
ON,
PRESELECTION 5 is the trailing value from PRESELECTION 2
HYSTERESIS 2
This parameter defines the switching hysteresis of the switch-off point for preselection 2.
See chapter PRESELECTION 1 MENU.
PULSE TIME 2 (S)
Duration of output pulse for the switching condition of preselection 2.
See chapter PRESELECTION 1 MENU.
OUTPUT TARGET 2
Assignment of an output for the switching condition of preselection 2.
See chapter PRESELECTION 1 MENU.
0 NO No assignment
1 CTRL OUT 1 Switching condition assigned to “Ctrl. Out 1”
2 CTRL OUT 2
Switching condition assigned to “Ctrl. Out 2”
3 CTRL OUT 3
Switching condition assigned to “Ctrl. Out 3”
4 CTRL OUT 4
Switching condition assigned to “Ctrl. Out 4”
5 CTRL OUT 5
Switching condition assigned to “Ctrl. Out 5”
6 CTRL OUT 6
Switching condition assigned to “Ctrl. Out 6”
OUTPUT POLARITY 2
Polarity for the switching condition of preselection 2.
See chapter PRESELECTION 1 MENU.
OUTPUT LOCK 2
Latch for the switching condition of preselection 2.
See chapter PRESELECTION 1 MENU.
START UP DELAY 2 (S)
Start-up suppression for the switching condition of preselection 2.
See chapter PRESELECTION 1 MENU.