Balluff BAE SC-TL-F03, User Manual

Page: 74 / 118

www.balluff.com
14
Control outputs (X6)
Six control outputs are available at terminal X6 pin 2, 3, 4, 5, 6 and 7.
Switching conditions can be set in the PRESELECTION MENU. The output Ctrl. Out1
– 6
are fast PNP outputs with a switching capability of 5 – 30 Volt / 200 mA per channel.
The switching voltage of the outputs must be applied to input terminal X6 pin 1 (COM+).
In case of switching inductive loads it is advisable to use external filtering of the coils.
Wiring of the
control-outputs :
USB interface (X7)
A serial USB interface (mini USB) is available at terminal X7.
The USB interface can be used as follows:
•
For parameterization of the device during commissioning
•
To change parameters during operation
•
For reading out actual values via PC
The serial USB communication is done with a baud rate of " 115200 Baud " and a
serial data format of " 8none1 " and cannot be changed by the user!