Balluff BAE SC-TL-F03, User Manual

Page: 78 / 118

www.balluff.com
18
General Menu
MODE
This parameter specifies the selected measuring function.
0 NOT DEFINED
Operating mode: Not defined, modulation and measurement
results are zero
4 START / STOP Operating mode: Start / Stop – interface converter
ENCODER DIRECTION
This parameter reverses the counting or traversing direction.
0 FORWARD Forward
1 REVERSE Reverse
FACTOR
This parameter defines the factor with which the measurement result is multiplied.
-99999999 Smallest value
1 Default value
99999999 Highest value
DIVIDER
This parameter defines the divisor with which the measurement result is divided.
-99999999 Smallest value
1 Default value
99999999 Highest value
ADDITIVE VALUE
This parameter defines an additive constant, which is added to the measurement result.
-99999999 Smallest value
0 Default value
99999999 Highest value
LINEARIZATION MODE
This parameter defines the linearization function. Observe notes in the appendix!
0 OFF No linearization
1 1 QUADRANT Linearization in the 1. quadrant
2 4 QUADRANT Linearization in all 4 quadrants
FACTORY SETTINGS
0 NO
No default values are loaded
1 YES
Load default values of all parameters (grey marked default values)