Baldwin Boxall OmniCarePLUS Multi-Exchange EVC, Installation Instructions Manual

Page: 29 / 54

OmniCarePLUS Multi-Exchange EVC
Installation Instructions
OmniCarePLUS issue 1
19
4.3.1.1 Administration Settings (Settings Tab)
Figure 4.3 — Administration Settings (Settings Tab)
• Set the correct Comport for the Router & OmniCare (refer
to Device Manager for details).
N
OTE
: In Device Manager six COM ports will be displayed. The first four
COM ports (1-4) are not used. The "Prolific" Serial Converter is the
Router COM Port and the remaining port is the OmniCare port.
• The Baudrates are factory preset and should not be altered.
• The Poll rate is factory preset and should not be altered.
• Set the correct PC Control address.
N
OTE
: Each PC must have a unique address on the network, starting with
address "0". The maximum number of PCs is 10 (i.e. address 9).
• Select a custom ringtone if required.
• Enter the correct Site Name
• Load a background image (if required)
• Tick the "Fire Panel" option if the local control panel has a
local fire panel input (i.e. system remains in standby until
activated by the fire panel).
Select the "Console" Tab.