Baldwin Boxall OmniCarePLUS Multi-Exchange EVC, Installation Instructions Manual

Page: 21 / 54

OmniCarePLUS Multi-Exchange EVC
Installation Instructions
OmniCarePLUS issue 1
11
3 Hardware Installation
3.1 I
NSTALLATION
O
VERVIEW
The OmniCarePLUS Multi-Exchange EVC system installation
can be viewed as separate installation operations.
• Each Local Control Point must initially be installed and
tested as a stand-alone system. The outstations and cabling
for the Local Control Points can be installed and
commissioned separately to the network installation..
• The OmniCarePLUS network can then be installed and each
span tested (subject to the distance limitations) as required.
The network configuration of the system is pre-set in the
factory. Network cables & requirements are included in the
BVRDNET manual.
• The Network Control Station (NCS) Hub & PC can be
positioned where required and connected to the network.

As more commissioned Local Control Points are connected
to the network, the touchscreen configuration options and
settings can then be updated to suit.